Aggregation

10/100/1000 Mbit Copper Tap electrical (copper) Taps converter Taps

10/100/1000 Mbit Copper Tap

This advanced Cubro 10/100/1000 copper tap is an all new development based on the latest PHY chips. This tap is also a converter tap because the output ports are SFP, so the user can select which media he wants by changing the SFP. There are some special add-ons available PoE powered and PoE transparent.

Specifications

  • General Functions: 10/100/1000 tapping
  • Special Funktion: PoE transparent | PoE powered | Converter function
  • Amount of in and out ports:
    • 2 x RJ45 10-100-1000 Mbit and 2 x SFP
  • Port Bandwitdh: 10 Mbit | 100 Mbit | 1 Gbit
  • Supported Connections: RJ45
  • Managment: yes USB
  • Part Nr #: CBR.TAP-10/100/1000

Certificates

CE/FCC/ETL | CMMI Level 3 | ISO 27001 certification | ISO 9001 certification | Fully RoHS compliant | UL 60950-1 / CSA C22.2 60950-1-07 / IEC 60950-1 (2005) | EN 60950-1 (2006)

Electrical Specifications:

  • DC Input: 12VDC nominal. 1A

Mechanical Specifications:

  • Dimension (HxWxD): 3 x 11,2 x 17 cm
  • Dimension (HxWxD): 1,8 x 4,4 x 6,7 in
  • Weight : 280 g

Datasheet :

  • 19

    19" frame for 3 Cubro Modules

    19' frame for mounting in standard 19' racks, each frame can hold 3 modules

  • Cubro 12 V DC UPS

    Cubro 12 V DC UPS

    The Cubro UPS2 was designed to provide user specified regulated power output from a wide range of input voltages or battery backups, microprocessor assisted LiFePO4 battery charging and cell balancing. The UPS contains a synchronous boost converter with high accuracy voltage and current regulation and automatic system power path selection from adapter or battery. It charges the battery in three phases: preconditioning, constant current mode and constant voltage mode.

  • Cubro 48 V DC - 12 V DC powersupply

    Cubro 48 V DC - 12 V DC powersupply

    The Cubro 48 V DC power supply was designed to provide 48 V DC for most Cubro tap devices. This device is a 48V DC - 12 V DC converter. 

  • Cubro Solutions

    Cubro NPB units support bypass function

    The Cubro Bypass Application is a superior way to provide a fail-safe access port for an in-line monitoring appliance. From EX2 with Gbit up to EX 20400 with 100 Gbit bypass feature. With and without optical layer 1 switch support.

     

    Aggregation of an 10 Gbit link and output to an 10 Gbit port

    Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

    384 x 10 Gbit ports cross connect

    We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

    • 400 Gbit backbone
    • tunneling via VXLAN
    • non blocking
    • any to any & many to any & any to many support
    • easy expandable

     

    STP Monitoring multi 100 Mbit links

    To monitor hundreds of 100 Mbit links, like on an SMS centre or on an STP, Cubro offers and flexible and price wise solution with 100 Mbit Flextap and Cubro Packetmaster EX5-2 as aggregator and filter device.

    aggregation 40 x 10 Gbit links with one EX 20400

    Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
    The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
    a 40 Gbit port into 4 independent 10 Gbit ports.

    Stacking Packetmasters

    Customer Solution!

    Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

    Monitoring offload

    The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

    • Reduce Monitoring cost by off-loading the existing monitoring system.
    • Reducing not only Capex also Opex goes down because of less hardware resources.
    • Still the full metadata information on user plan traffic.

    Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

    This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

    A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

    EX2 media & speed converter

    In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

    Packetmaster as Patchfield

    The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

    EX2 10 Gbit monitoring with load balanced output

    Use the integrated optical TAP to connect to the live link and use the load balancing features to monitor the traffic