Aggregation

Cubro micro TAP electrical (copper) Taps

Cubro micro TAP

The CUBRO µTap is designed to tap one 10/100 Base-T link. This small, flexible and cheap Tap that doesn't require electricity is the ideal device for users who only need monitoring from time to time.

The setup is very simple and needs no
configuration at all. On the monitoring output any standard NIC card can be used as the receiving device in combination with any capture tool „example: Wireshark“

But you need two NIC cards to capture both directions !

In case you dont cave two NIC cards in your computer you can use the Cubro Ethernet USB Converter. This plug-and-play device adds two full ethernet interfaces to your computer and then you can capture poth directions easily.

 

Specifications

  • General Functions: 10/100 tapping
  • Special Funktion: full passiv
  • Amount of in and out ports:
    • 4 x RJ45 10-100
  • Port Bandwitdh: 10 Mbit | 100 Mbit
  • Supported Connections: RJ45
  • Managment: no

Certificates

ISO 9001 certification | Fully RoHS compliant

Datasheet :

  • USB 3.0 to Dual Port Gigabit Ethernet Adapter

    USB 3.0 to Dual Port Gigabit Ethernet Adapter

    The Cubro USB 3.0 to Dual Port Gigabit Ethernet Adapter lets you add two Gigabit Ethernet ports to your laptop or Ultrabook™ computer through a single USB 3.0 port, and features an integrated USB 3.0 pass-through port that keeps your USB port available for use with external storage or other peripherals. Each RJ45 port supports 10/100/1000 Mbps Ethernet and is fully compatible with IEEE 802.3i/u/ab standards.

  • Cubro Solutions

    aggregation 40 x 10 Gbit links with one EX 20400

    Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
    The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
    a 40 Gbit port into 4 independent 10 Gbit ports.

    Packetmaster as Patchfield

    The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

    Aggregation of an 10 Gbit link and output to an 10 Gbit port

    Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

    Amplification

    You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

    Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

    This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

    A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

    GRE de - encapsulation

    Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

    100 Gbit LR4 multiple splitting

    Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

    Monitoring offload

    The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

    • Reduce Monitoring cost by off-loading the existing monitoring system.
    • Reducing not only Capex also Opex goes down because of less hardware resources.
    • Still the full metadata information on user plan traffic.

    384 x 10 Gbit ports cross connect

    We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

    • 400 Gbit backbone
    • tunneling via VXLAN
    • non blocking
    • any to any & many to any & any to many support
    • easy expandable

     

    Stacking Packetmasters

    Customer Solution!

    Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

    EX2 Multi Gbit Cooper aggregation

    The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.