SFP MEDIACONVERTER 1 GBIT & 10 GBIT

 SFP  MEDIACONVERTER  1 GBIT & 10 GBIT

SFP - SFP Media Converter combining data rate independent connectivity with support for SFP and SFP+ transceivers. The CUBRO MeDiCon 10 G defines a new level of deployment flexibility and inventory management. Enabling the implementation of an extremely wide range of optical infrastructure solutions from media conversion and signal boosting to lambda conversion, Wavelength Division Multiplexing (WDM) and Optical Add/Drop Multiplexing (OADM).

Sync-E and IEEE1588 ready

The Cubro MeDiCon 10 G is also suitable for Sync-E networks if no copper SFPs are used. If your network is carrying IEEE 1588 Sync traffic standard mediaconverters with switches inside it could produce a delay depending on the traffic load. This delay variation has a bad impact on the quality of the sync signal. The Cubro MeDiCon 10 G has a very small delay of 500 ps. This delay is stable and is not dependent on the traffic load.

Specifications

  • Size: 100 x 55 x 27 mm
  • Weight: < 100 g
  • Datasheet:

Share this product

Cubro Solutions

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Layer 1 Media Conversion

The Cubro 1/10 Gbit Media converter is a nice a simple tool to solve many problems in the daily network business. You can select the media by changing the SFP. The unique design supports also CWDM / DWDM and BIDI SFP.

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.

EX2 media & speed converter

In this very simple solution the Packetmaster EX2 works only as a bidirectional media and speed converter. The size and the fan less construction, makes the EX2 the flexibles’ and cheapest device on the market.

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links