Packetmaster-Matrix

Packetmaster EX32100 Cubro Packetmaster

Packetmaster EX32100
  • 32 x 100 Gbit non blocking monitoring switch 
  • Throughput – bits per second  3,2 TB
  • 25 Gbps MSA support
  • Packet Buffer size 24 MB
  • User Definable Match Keys and Actions
  • Tunnel choices – VXLAN, VXLAN-GPE, NVGRE, GENEVE (unlimited)
  • two step 1588 time stamping
  • SDE Counters
  • sFlow
  • Ingress and Egress Mirroring to Analyzer with ERSPAN

Specifications

  • General Functions: traffic filtering layer 7 | load balancing | bypass | GRE tunnel | VXLAN tunnel | aggregate many to any | aggregate any to many
  • Special Funktion: filter on VLAN | VLAN add / remove | MPLS add / remove | filter on MPLS | modify load balance hash | sflo / nflow generation
  • Amount of filter rules: +100000
  • Amount of in and out ports:
    • 32 x QSFP 28 100 Gbit
  • Port Bandwitdh: 100 Gbit
  • Supported Connections: QSFP28
  • Managment: RS 232 CLI | SSH CLI | SSH Menu | SSH API | WEB GUI | REST API
  • Part Nr #: CUB.EX32100

Certificates

CE/FCC/ETL | CMMI Level 3 | ISO 27001 certification | ISO 9001 certification | Fully RoHS compliant | UL 60950-1 / CSA C22.2 60950-1-07 / IEC 60950-1 (2005) | EN 60950-1 (2006)

Electrical Specifications:

  • Input Power: 100-240V, 2A, 47-63Hz

Mechanical Specifications:

  • Dimension (HxWxD): 42.8 x 435 x 393.7 mm
  • Weight : 9.4 kg

Datasheet:

Cubro Solutions

384 x 10 Gbit ports cross connect

We use 6 Packetmaster EX 20400 to realize this 384 x 10 Gbit port cross connect !

  • 400 Gbit backbone
  • tunneling via VXLAN
  • non blocking
  • any to any & many to any & any to many support
  • easy expandable

 

GRE de - encapsulation

Virtual environments needs virtual Taps, virtual Taps need GRE to send it over the virtual switchto a real monitoring device. All Packetmaster units can decapsulate GRE traffic to get the data in their original format.

Amplification

You can enlarge the transfer range of your media dramatically without risking errors on your data. The examples below show some common options, but a lot more combinations are possible.

Stacking Packetmasters

Customer Solution!

Request: aggregation and filtering traffic for monitoring system 32 x 1 Gbit links & 10 x 10 Gbit links

Aggregation of two 10 Gbit span ports to 1 10 Gbit output with EX2+

This application is normally not possible because the EX2+ has only two 10 Gbit ports and you need 3 to do this job.  But we at Cubro give our units some extra features to do this with two ports.

A optical ports has an transmitter and a receiver part, this two “ports” can be used separately in all Cubro NPB. The other feature what you need is the optical tap at the back.

Aggregation of an 10 Gbit link and output to an 10 Gbit port

Aggregation of one 10 Gbit link with optical splitter to 10 Gbit fibre output

aggregation 40 x 10 Gbit links with one EX 20400

Cubro now offers a "NEW" Packetmaster solution with 80 x 10 Gbit Ethernet ports.
The base unit is the EX 20400 with a new firmware that gives us the possibility to convert
a 40 Gbit port into 4 independent 10 Gbit ports.

100 Gbit LR4 multiple splitting

Sometimes it is needed to tap a 100 Gbit LR4 link more than one time, this is not easy because the optical budget is too small to do that.

Packetmaster as Patchfield

The Packetmaster EX can be used as intelligent patch field. This is feature is possible because the EX has no designated in and out port configuration. Each port is an input and an output at the same time.

Monitoring offload

The smart Cubro solution to use your existing monitoring system even when your data traffic is growing exponential !

  • Reduce Monitoring cost by off-loading the existing monitoring system.
  • Reducing not only Capex also Opex goes down because of less hardware resources.
  • Still the full metadata information on user plan traffic.

EX2 Multi Gbit Cooper aggregation

The Packetmaster EX2 can work as a dual link TAP with dual aggregation output, with filtering and load balancing, at the same time.